decorations, for small signboards etc.
Working of the circuit is simple, when power is applied to the circuit the 47uF electrolytic capacitor charges through the current coming through the 47K resistor and the 4007 diode. During charging when the voltage of the circuit reached to 32V the diac become activated and the current become passing through the diac making the 10 LEDs switched ON for a very short time until the capacitor discharges completely. When the capacitor discharged the diac become deactivated and hence the LEDs goes off. This process repeats again and again due to which the LEDs will go ON & OFF continuously.
Copyright 2015 © CircuitDiagram.Org. All rights reserved.
Here is a project of a simple 230V mains LED flasher circuit. The circuit is very low cost consisting only four part and 10 LEDs. It is an ideal circuit when you want to make a flasher circuit in a very short time. It can be used at many places and for many purposes for example home and shop
Hello Readers, We frequently add new circuit diagrams, so do not forget to come back often. Thank you.
Sponsored Links
